| Execution |
Cold rolled, annealed and pickled EN 10088-2 2B |
| Dimensions |
| Sr No. |
Thickness (mm) |
Thickness
Tolerance (mm) |
Width (mm) |
Width Tolerance
Mill Edge (mm) |
| 1 | 4.0 | +/- 0.10 | 710 (max.) | +10 / -0 |
| 2 | 3.0 | +/- 0.08 | 710 (max.) | +10 / -0 |
| 3 | 2.0 | +/- 0.07 | 710 (max.) | +10 / -0 |
| 4 | 1.2 | +/- 0.60 | 710 (max.) | +10 / -0 |
| 5 | 1.0 | +/- 0.50 | 710 (max.) | +10 / -0 |
| 6 | 0.9 | +/- 0.045 | 710 (max.) | +10 / -0 |
| 7 | 0.8 | +/- 0.040 | 710 (max.) | +10 / -0 |
| 8 | 0.6 | +/- 0.030 | 710 (max.) | +10 / -0 |
| 9 | 0.5 | +/- 0.025 | 500 (max.) | +10 / -0 |
| 10 | 0.3 | +/- 0.020 | 500 (max.) | +10 / -0 |
| 11 | 0.2 | +/- 0.020 | 500 (max.) | +10 / -0 |
| 12 | 0.1 | +/- 0.020 | 350 (max.) | +10 / -0 |
|
| Tolerances width |
| Thickness (mm) |
Width Tolerance (+/-) on nominal Width (mm) |
| < 150 |
150 < 250 |
250 < 500 |
500 < 710 |
| 0.25-0.60 | 0.15 | 0.15 | 0.20 | 0.20 |
| 0.6-1.00 | 0.15 | 0.15 | 0.20 | 0.20 |
| 1.00-1.50 | 0.20 | 0.20 | 0.25 | 0.25 |
| 1.50-2.50 | 0.20 | 0.20 | 0.25 | 0.25 |
| 2.50-4.00 | 0.25 | 0.25 | 0.30 | 0.30 |
|
| Grades |
Austenitic stainless steels (1.4307, 1.4404, 14571 and others)
Austenitic stainless steels with reduced Nickel content (J3 with 1,2% max. Ni, J4 with 2%-3% Ni)
Martensitic stainless steels
Ferritic stainless steels
|
